Interesting. We don't have that specifically, but there are a couple of routes you could go. Most trailers will use the Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1 # TJSC-24 for stability in the corners so you could mount a receiver shank to that and use # TJSC-24-HD as a sidewind crank.
It sounds like you were picturing more of a trailer tongue style option, so you could use a jack like the etrailer Square Jack w/ Footplate - Drop Leg - Bolt On - Zinc - Sidewind - 29-1/8"... view full answer...
The Curt # C45312 and the B&W # BWBMHD30011 ball mount are wholly manufactured in the USA.
Both ball mounts feature a 2 inch drop or a 1 inch rise if inverted. The B&W has a 16K capacity, with the Curt model having a 12K capacity. Both are designed for trailer balls with a 1-1/4 inch diameter shaft. view full answer...
The Rhino-Rack roof rack that fits your 2013 Honda Civic sedan is made in Australia. The correct parts that make up the rack are the following:
- Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
- Rhino-Rack 2500 Series Legs # RRRLKVA
- Custom DK Fit Kit # DK319
You made a really nice choice with Rhino-Rack because it is the best value for a roof rack; Rhino-Rack's quality is equal to similar brands, but at a better price point because you aren't paying extra for a specific brand name... view full answer...
If you are wanting an option made in the USA I recommend the Mighty Cord Replacement Hardwire RV Plug - Male End - 50 Amp # A10-P50VP. view full answer...
The Swagman Es-Spec # S94FR is made overseas. If you're needing this rack for a travel trailer then this is the best option you're going to be able to find because all of the other platform options that are able to hold up to the extra movement at the back of a travel trailer come from Swagman as well.
If you just like the looks and feel of the E-Spec then a comparable option that is made in the USA is the Thule T2 Pro XTR # TH69TX. It has the same 60 lb per bike weight rating and uses... view full answer...
According to Rampage Products, the # RA9425 step bars are constructed of 3 inch diameter stainless steel tubing with a .07 inch wall thickness. The same bar is also available constructed of black powder coated steel tubing with the identical wall thickness, part # RA8825. view full answer...
I spoke with my contact at Lippert regarding the Trailair Rota-Flex 5th Wheel Pin Box # LC328329 and he said that the heavy-duty rubber compound that's built into the head assembly serves as the bolster plate. It will do a great job of absorbing bumps and road shock as well as adding support to the connection.
I have also attached an image pointing out this component on the pin box. view full answer...
For a similar 20k fifth wheel hitch that fits the OEM rail kit of your 2021 Ford F-350 that is made in the USA you'd want the B and W Companion Hitch part # BWRVK3300 but the Reese hitches are not made in the USA. view full answer...
I spoke with my contact at Derale and he informed me that the steel blades of the Derale 18 inch Rigid, Steel-Blade Race Fan - Belt Driven - 8,000 RPM, part # D17318, are made from stamped steel.
If you wanted a fan that features stainless steel blades, and flattens out when sufficient airflow is present, therefore increasing fuel mileage and power I would recommend a Derale 18 inch Heavy-Duty, Stainless Steel Flex Fan, part # D17018. view full answer...
In regards to the CE Smith Bunkboard Guide-On Kit part # CE27600K75, the brackets and posts are galvanized and the hardware is zinc plated which will do a great job of preventing rust and corrosion. The kit is designed exclusively for use on boat trailers so rust/corrosion protection was not overlooked. We even have some reviews from customers after a year of use and there were no reports of rust or corrosion.
CE Smith doesn't offer a specific warranty time for their products. Their warranty... view full answer...
The u-bolt in the Replacement U-Bolt Assembly for Yakima LockNLoad Platforms and TopWater Fishing Rod # Y27CR is made from stainless steel and will use a 10mm nut.
We also have the corresponding replacement knobs # Y89CR if you wanted to use those instead. view full answer...
The Chrome Edge Trim - 50' Roll # SAT012ET is a plastic edging that is flexible and has the adhesive for permanent installation. It fits up to 1/8 inch thick material. It is not chrome plated but rather has a permanent chrome finish. view full answer...
Draw-Tite currently manufacturers their trailer hitches, including # 65076, in Mexico. Curt manufacturers their hitches in the US. For a 2018 Ford F-350 the Curt front hitch is # C31078. view full answer...
There is an exterior RV ladder that will work for you which comes in black, but the Surco # SP502L does not.
Instead, you can use the Stromberg Carlson RV Exterior Ladder # LA-401BA which is longer than the Surco at 99-1/2" but is designed so you can trim it to your desired length with a hacksaw or tube cutter, which means you can make it the same 84-1/2" length as the Surco. view full answer...
There are many tandem axle equalizers that have additional shock absorption integrated. I've linked the page to all of the options we have which will be dependent on the axle weight capacity of your trailer. We have products from Dexter and Lippert Components which are both US based companies, but the manufacturing for these products is overseas to US specs.
We also have the Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle # LC1565391 which is a air... view full answer...